|
PROJECT : |
Design, Supply, Install & Commission Two (2) High Performance Taprogge DF for PDI Condenser Inlet |
|
INDUSTRY : |
Power |
|
USE : |
Condenser Cooling Water Inlet |
|
CLIENT : |
TNB REMACO / Port Dickson Power Station |
|
LOCATION : |
Port Dickson, Negeri Sembilan |
|
SYSTEM : |
TAPPROGGE Debris Filtration System |
|
STATUS : |
Installed & commissioned - December 2014 |
|
DESCRIPTION : |
This is the replacement of existing filters which are failed to deliver its duty to protect the condenser tubes and filtering the CW intake. As requested by PDPS and with referring to our installation base in Janamanjung, we will provide the Operating Panel at the CCR to monitor and control remotely without integrating with the DCS. |
|
PROJECT : |
Design, Supply, Install & Commission Four (4) High Performance Taprogge DF for Unit 1 Condenser Inlet |
|
INDUSTRY : |
Power |
|
USE : |
Condenser Inlet Filtration Systems |
|
CLIENT : |
TNB Janamanjung Sdn Bhd |
|
LOCATION : |
Manjung, Perak |
|
SYSTEM : |
TAPPROGGE Debris Filtration System |
|
STATUS : |
Completed October 2011 |
|
PROJECT : |
DESIGN SUPPLY, INSTALL & COMMISSION FOUR (4) HIGH PERFORMANCE TAPROGGE DF FOR ACW SYSTEM UNIT 2 & 3 |
|
INDUSTRY : |
Power |
|
USE : |
ACW Intake Filtration Systems |
|
CLIENT : |
TNB Janamanjung Sdn Bhd |
|
LOCATION : |
Manjung, Perak |
|
SYSTEM : |
TAPPROGGE Debris Filtration System |
|
STATUS : |
On-going |
|
DESCRIPTION : |
This is the repeat order from TNB JANAMANJUNG due to excellent and proven performance of recently installed TAPROGGE DF (4 x 1800mm at Condense Inlet & 2 x 800mm at ACW System) |
|
PROJECT : |
SUPPLY & DELIVERY OF 84" KSB MAMMOUTH BFV |
|
INDUSTRY : |
Power |
|
USE : |
Isolation Valve |
|
CLIENT : |
TNB Port Dickson |
|
LOCATION : |
Port Dickson, Negeri Sembilan |
|
SYSTEM : |
Condenser Make-up Butterfly Valve |
|
STATUS : |
Completed - February 2009 |
|
PROJECT : |
SUPPLY & DELIVERY OF COMPLETE VALVES TO TURBINE MAINTENANCE SECTION |
|
INDUSTRY : |
Power |
|
USE : |
Turbine |
|
CLIENT : |
TNB Janamanjung |
|
LOCATION : |
Manjung, Perak |
|
SYSTEM : |
Valve - Turbine By-pass |
|
STATUS : |
Completed - March 2014 |
|
PROJECT : |
Steel Structures Blasting/Coating & Painting |
|
INDUSTRY : |
Power |
|
USE : |
GF 2 Turbine & Boiler Hall - Corrosion Protection |
|
CLIENT : |
Kapar Energy Ventures (KEV) |
|
LOCATION : |
Klang, MALAYSIA |
|
SYSTEM : |
Nukote EP Prime II & Nukote ST |
|
COATED AREA : |
1100 m2 |
|
COMPLETION : |
February 2010 |
|
DESCRIPTION : |
The plant has facing a problem with the corrosion at their Boiler and Turbine structures due the exposure to saltwater and abrasive ash. We have blasted the steel structures, primed and coated with polyurea up to 2 meter high. |
|
PROJECT : |
Kenyir Draft Tube Gate Gantry Crane Coating |
|
INDUSTRY : |
Power |
|
USE : |
Crane Structure Protection |
|
CLIENT : |
Stesen Janaelektrik Sultan Mahmud, Kenyir |
|
LOCATION : |
Terengganu, Malaysia |
|
SYSTEM : |
Nukote Polyurea ST |
|
COATED AREA : |
300 m2 |
|
COMPLETION : |
July 2009 |
|
DESCRIPTION : |
Stesen Janaelektrik Sultan Mahmud, Kenyir is facing a problem with their Gate Gantry Crane which corroded and rusted. The existing protection paint used started pilling off and causing a problem to the structure. |
|
PROJECT : |
Kenyir Intake Gantry Crane Coating |
|
INDUSTRY : |
Power |
|
USE : |
Crane Structure Protection |
|
CLIENT : |
Stesen Janaelektrik Sultan Mahmud, Kenyir |
|
LOCATION : |
Terengganu, Malaysia |
|
SYSTEM : |
Nukote Polyurea ST |
|
COATED AREA : |
450 m2 |
|
COMPLETION : |
May 2010 |
|
DESCRIPTION : |
Stesen Janaelektrik Sultan Mahmud, Kenyir is facing a problem with their Gate Gantry Crane which corroded and rusted. The existing protection paint used started pilling off and causing a problem to the structure. |
