|
PROJECT : |
Steel Structures Blasting/Coating & Painting |
|
INDUSTRY : |
Power |
|
USE : |
GF 2 Turbine & Boiler Hall - Corrosion Protection |
|
CLIENT : |
Kapar Energy Ventures (KEV) |
|
LOCATION : |
Klang, MALAYSIA |
|
SYSTEM : |
Nukote EP Prime II & Nukote ST |
|
COATED AREA : |
1100 m2 |
|
COMPLETION : |
February 2010 |
|
DESCRIPTION : |
The plant has facing a problem with the corrosion at their Boiler and Turbine structures due the exposure to saltwater and abrasive ash. We have blasted the steel structures, primed and coated with polyurea up to 2 meter high. |
|
PROJECT : |
Kenyir Draft Tube Gate Gantry Crane Coating |
|
INDUSTRY : |
Power |
|
USE : |
Crane Structure Protection |
|
CLIENT : |
Stesen Janaelektrik Sultan Mahmud, Kenyir |
|
LOCATION : |
Terengganu, Malaysia |
|
SYSTEM : |
Nukote Polyurea ST |
|
COATED AREA : |
300 m2 |
|
COMPLETION : |
July 2009 |
|
DESCRIPTION : |
Stesen Janaelektrik Sultan Mahmud, Kenyir is facing a problem with their Gate Gantry Crane which corroded and rusted. The existing protection paint used started pilling off and causing a problem to the structure. |
|
PROJECT : |
Kenyir Intake Gantry Crane Coating |
|
INDUSTRY : |
Power |
|
USE : |
Crane Structure Protection |
|
CLIENT : |
Stesen Janaelektrik Sultan Mahmud, Kenyir |
|
LOCATION : |
Terengganu, Malaysia |
|
SYSTEM : |
Nukote Polyurea ST |
|
COATED AREA : |
450 m2 |
|
COMPLETION : |
May 2010 |
|
DESCRIPTION : |
Stesen Janaelektrik Sultan Mahmud, Kenyir is facing a problem with their Gate Gantry Crane which corroded and rusted. The existing protection paint used started pilling off and causing a problem to the structure. |
|
PROJECT : |
Topside Major Maintenance Internal Vessel |
|
INDUSTRY : |
Oil and Gas |
|
USE : |
Primary Containment/Anti Abrasion |
|
CLIENT : |
Petronas Carigali Sdn Bhd |
|
LOCATION : |
Offshore Oil Platform Peninsular Malaysia |
|
SYSTEM : |
Nukote Polyurea ST |
|
COATED AREA : |
440 m2 |
|
COMPLETION : |
June 2007 |
|
DESCRIPTION : |
Petronas Carigali needed to recoat their internal vessels but the shutdown time was only for a few days. This meant that an epoxy based coating was out of the question due to the long drying time needed. The decision was made to use Nukote Polyurea ST due to its fast curing time and superior physical qualities. The absence of VOCs was also a factor due to the nature of the project which involved working in confined space. |